• Parker 316 Stainless Steel Rotary Process Plug Valve with Fluorocarbon Rubber Seal and PTFE Back-Up Ring, 1/4" A-LOK Compression Inlet/Outlet Port, 3000 psi

    Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick quarter-turn operation in a compact attractive package. The patented blow-out resistant seat design offers reliable sealing technology at all operating pressures. In addition to on-off actuation, the plug design allows forward flow throttling. The pressure balanced atmospheric seals are backed by PTFE rings to enhance their performance and increase cycle life. Pressures up to 3000 psig (207 bar) CWP. Fluorocarbon rubber seats and seals. Low operating torque. Minimum pressure drop. Throttling capability. Positive handle stops. Color coded fracture resistant nylon handles with directional flow indication. Easy to service. 100 percent factory tested. Two ferrule A-LOK compression port.

    • Brand: Parker
    • ASIN: B004M18U82

  • Backup Ring Asst, PTFE, 325 Pcs, 36 Sizes

    ' Backup Ring Assortment, SAE, Material PTFE, Number of Pieces 325, Number of Sizes 36, Durometer 55 Shore D, Hardness Very Hard, Sizes Included AS568A Dash No. (15) Each of 005 to 012, (10) Each of 013 to 018, 110 to 116, (5) Each of 117 to 121, 210 to 219, Case Type Plastic Box with Lid Chart, Meets/Exceeds MS28774, Temp. Range -100 Degrees to 500 Degrees F, Color White '

    • Brand: GRAINGER APPROVED
    • ASIN: B01LWJD0M7

  • SAE AS8791C Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin

    This specification and part standard covers polytetrafluoroethylene (PTFE) resin material and the dimensional requirements for scarf-cut retainers (back-up rings) previously covered by MIL-R-8791 and MIL-R-8791/1. The retainers are intended for use in hydraulic and pneumatic system components as anti-extrusion devices in conjunction with seals and O-rings.

    • ASIN: B00QJMP030

  • 010 PTFE O-Ring, 55D Durometer, White, 1/4" ID, 3/8" OD, 1/16" Width (Pack of 10)

    This PTFE O-ring is white in color, has a durometer of 55D, a round cross-section, and is designed for use in a wide variety of sealing applications. PTFE has excellent heat, fuel, and chemical resistance and is acceptable for temperature applications between -328 degrees F (-200 degrees C) to 500 degrees F (260 degrees C). It can be used outdoors, with lubricants, hydrocarbons, acids, alkalis, detergents, alcohol, ketones, steam and refrigerants, and also has good electrical resistance. PTFE is vulnerable to high vacuum seals, low compression vacuum sealing flanges, and super-heated steam. This PTFE O-ring has a shore durometer of 55D. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cros...

    • Color: White
    • Brand: Small Parts
    • ASIN: B000FMYQ6W

  • Parker 316 Stainless Steel Rotary Process Plug Valve with Fluorocarbon Rubber Seal and PTFE Back-Up Ring, 3/8" A-LOK Compression Inlet/Outlet Port, 3000 psi

    Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity and quick quarter-turn operation in a compact attractive package. The patented blow-out resistant seat design offers reliable sealing technology at all operating pressures. In addition to on-off actuation, the plug design allows forward flow throttling. A selection of valve seal materials may be chosen for media compatibility and performance over a broad range of temperatures. The pressure balanced atmospheric seals are backed by PTFE (Polytetrafluoroethylene) rings to enhance their performance and increase cycle life. Pressure ratings for reverse flow direction is 150 psig (10 bar) and downstream vent option is 150 psig (10 bar). 0.281" Orifice. Flow rate Cv: 3.19. 3/8" Double ferrule compression inlet connection. 3/8" Double ferrule compression outlet connection. Manual operated. Temperature rating from -10 degree F to 400 degree F (-23 degree C to 204 degree C). Pressures up to 3,000 psig (207 bar) CWP. Quarter-turn operation. Reliable simple design. Stainless steel construction. Highly fluorinated fluorocarbon rubber seals. Low operating torque. Minimum pressure drop. Throttling capability. Color coded fracture resistant nylon handles with directional flow indication. 100 Percent factory tes...

    • Brand: Parker
    • ASIN: B004M18U8M

  • Parker 316 Stainless Steel Rotary Process Plug Valve with Fluorocarbon Rubber Seal and PTFE Back-Up Ring, 1/4" NPT Female Inlet/Outlet Port, 3000 psi

    Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick quarter-turn operation in a compact attractive package. The patented blow-out resistant seat design offers reliable sealing technology at all operating pressures. In addition to on-off actuation, the plug design allows forward flow throttling. The pressure balanced atmospheric seals are backed by PTFE rings to enhance their performance and increase cycle life. Pressures up to 3000 psig (207 bar) CWP. Fluorocarbon rubber seats and seals. Low operating torque. Minimum pressure drop. Throttling capability. Positive handle stops. Color coded fracture resistant nylon handles with directional flow indication. Easy to service. 100 percent factory tested. ANSI/ASME B1.20.1 internal pipe threads.

    • Brand: Parker
    • ASIN: B004M18U8C

  • 311V4-02120 2188-9005 E131-1308 Fuel Tank Cap FITS for Hyundai Excavator Digger

    4364915 BOOM CYLINDER SEAL KIT, RH APPLICABLE TO EXCAVATOR EX200-5/EX200LC-5/EX210H-5/EX210LCH-5, CYLINDER PART NO. 4317393, ROD 85mm & BORE 120mm, AFTERMARKET REPLACEMENT PARTS MADE BY MOTTROL

    • Brand: FARWAY
    • ASIN: B078JGFRNQ

  • Parker Hannifin 4M4F-PR4-VT-SS Series PR Stainless Steel Rotary Plug Valve, Fluorocarbon Rubber Seal, PTFE Back-Up Ring, 1/4" MNPT x 1/4" FNPT

    Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick quarter-turn operation in a compact attractive package. The patented blow-out resistant seat design offers reliable sealing technology at all operating pressures. In addition to on-off actuation, the plug design allows forward flow throttling. A selection of valve seat and seal materials may be chosen for media compatibility and performance over a broad range of temperatures. The pressure balanced atmospheric seals are backed by PTFE rings to enhance their performance and increase cycle life.

    • Brand: Parker Hannifin
    • ASIN: B01BY6S4BU

  • 4216264 ARM CYLINDER SEAL KIT APPLICABLE TO EXCAVATOR EX150, AFTERMARKET REPLACEMENT PARTS

    4216264 ARM CYLINDER SEAL KIT APPLICABLE TO EXCAVATOR EX150, CYLINDER PART NO. 01001-UP, ROD 85 & BORE 120, AFTERMARKET REPLACEMENT PARTS MADE BY MOTTROL

    • Brand: MOTTROL
    • ASIN: B01HQ1AEDI
    • UPC: 699618083958

  • Back-Up Ring #210, PTFE; Replaces Waukesha Cherry-Burrell Part# BURT210

    Springer Parts Back-Up Ring #210, PTFE; Replaces Waukesha Cherry-Burrell Part# BURT210 SPRINGER PARTS ARE NOT OEM PARTS. THEY ARE AFTER MARKET OEM REPLACEMENT PARTS.

    • Brand: Springer Parts
    • ASIN: B00EBW801O